New Products
Sale
 
 

Download the TCH catalog

case hardware enclosure hardware
 

resources.tiles.rightColumn.quickOrder



 

 
 
 

resources.tiles.rightColumn.cart

Your shopping cart is empty

 
 
 

Got a question? We're here to help.

 
 
 
 

Request pricing/samples

 
 
 
 

Sign up for newsletter

 
cabinet hardware speaker hardware

CAD FilesCAD Files
About PCB Pluggable Panel Mounting DIN Rail Screwless Barrier

Submit an Inquiry
for a Dinkle Product

Dinkle PCBTerminal Blocks

The terminal block can be soldered directly onto a PCB, which uses the blocks to connect to the remaining circuit for signal transmission.

Types of PCB Terminal Blocks:

Wire Cage Model
The EK and ESK series are PCB terminal blocks with pitch size available at 3.50 mm, 3.81 mm, 5.00 mm, 5.08 mm, 6.35 mm, 7.50 mm, 7.62 mm, 9.50 mm, 10.0 mm, 10.16 mm, and have three different wiring angles at 90, 135 and 180 degrees to accommodate single-, dual-, or triple-layered designs and increase application diversity.

The wire range is from 28 AWG to 6 AWG, with the EK series providing the design that takes up very little space for maximum electrical capacity, thus making it suitable for power supplies, frequency converts, and other related products.

All EK series use framed-wiring method and are maintenance-free, resistant to shock, less prone to loosening, covered by a large conducting surface, and highly reliable. The product design complies with the IEC60998 and UL1059 standards, and has been certified by UL and VDE standards.

Front Entry Model
The DT-123 series are PCB terminal blocks with front entry. The screws and the wires are on the same plane to enable easy access, making the series suitable for exposed PCB, or those mounted outside of the equipments. The DT-123 series are single-terminal sets with connections on the side so that they can be assembled into the desired number of terminals.
Wire Protector Type
The ED/166/EDH series are Wire Protector Style PCB terminal blocks with two models, either round-pin or square-pin.

Pitch sizes are available in 3.50 mm, 3.81 mm, 5.00 mm, 5.08 mm, and 10.00 mm, with three different wire entry angles at 90, 135, and 180 degrees. Most of this series provide 2p and 3p bases and can be combined into any desired terminal number.

The 166 models have fixed P numbers, but provide 4 mm of maximum wiring space. This series provides the most economical method of wiring, and is suitable for security systems, lighting systems, and regular electronics use.