DIN Rail Terminal Blocks

Compact and miniature design saves wiring space. Accessories including marking labels,bridges,and partition plates,that can meet various requirements. High reliability and robust design adapts vibration and harsh thermal variation to prevent terminal connection fault. IEC60947-7-1&UL1059 compliance.

Three conductors, compact design, saves wiring space. Accessories, included marking labels,bridges,and partition plates, meet various requirements. High reliability and robust design adapts vibration and harsh thermal variation to prevent terminal connection fault.

Four conductors, compact design, save wiring space. Accessories, included marking labels, bridges, and partition plates, meet various requirements. High reliability and robust design adapts vibration and harsh thermal variation to prevent terminal connection fault. IEC60947-7-1 & UL1059 compliance.

The DK series are terminal blocks designed for use on TS-32 and TS-35 DIN-rail size using frame-connectors.

The series are resistant to shock, less prone to loosening, large in contact surface area, and highly reliable. This series is available for wires of 1.5 mm ~ 240 mm. The external design focuses on uniformity so that the design itself it clear, aesthetically pleasing, and suitable for jumpers and labels.

All product designs comply with the IEC60947-7-1 & UL1059 international standards, as well as the CUL, UL, VDE certifications. The function of various part numbers for the DK series is as follows: DK: Track terminal blocks with two connection points sharing the same point, with single input and output on the circuitry.

The DK..-TR series are terminal blocks designed for use on TS-32 and TS-35 DIN-rail using frame-connectors.

The series are resistant to shock, less prone to loosening, large in contact surface area, and highly reliable. This series is available for wires of 1.5mm ~ 410mm. The external design focuses on uniformity so that the design itself it clear, aesthetically pleasing, and suitable for jumpers and labels.

All product designs comply with the IEC60947-7-1, and UL1059 international standards, as well as the CUL, UL, VDE certifications.

The function of various part numbers for the DK..-TR series is as follows: DK..-TR: Four connection points exist on the DK..-TR, and they are divided into either 3 inputs with 1 output, 2 inputs with 2 outputs, or 1 input with 3 outputs.

Grounding terminal blocks designed for use on standard DIN TS-32 and TS-35.

This series is available for wires of 1.5mm ~ 95mm. The external design focuses on uniformity so that the design itself it clear, aesthetically pleasing, and suitable for jumpers and labels.

All product designs comply with the IEC60947-7-1 & UL1059 international standards, as well as the CUL, UL, VDE certifications.

Designed for use on TS-32 and TS-35 DIN-rail using frame-connectors.

The series are resistant to shock, less prone to loosening, large in contact surface area, and highly reliable. This series is available for wires of 2.5mm. The external design focuses on uniformity so that the design itself it clear, aesthetically pleasing, and suitable for jumpers and labels. All product designs comply with the IEC60947-7-1, and UL1059 international standards, as well as the CUL, UL, VDE certifications.

The function of various part numbers for the DKK series is as follows: DKK: Four connection points exist on the DKK, but are divided into two independent circuits, with each division having single input and output on the circuitry.

Switch-type terminal blocks designed for use with TS-32 and TS-35 tracks. The series is suitable for jumpers and labels. All product designs comply with the IEC60947-7-1 & UL1059 international standards.

The DK..-TF series come with a fuse, and are designed for use with TS-32 and TS-35 tracks. LED can be installed if required. The series is suitable fuse of 5 mm in diameter, which can be easily replaced with the lifted lid.

DKTL6 and DKTD6 series of terminal blocks can be connected via simple circuits with duo current sensing abilities and various other tests.

There are stepped slides on the vertical sections for horizontal connection to fixed or segmented terminals. On the DKTL6 terminal blocks, there are terminal holes for use with testing rods of 4 mm in diameter to assist in testing the signals inside the circuit.

This series of terminal blocks, when compared with the direct connection types, can save physical space while using fewer accessories. Furthermore, the installation is easy, the circuit is more distinguishable, and controls are also simpler.

DKES1.5 provides pluggable sockets, and is designed for use on TS-32 and TS-35 tracks.

There are options to place sockets on the top or on the sides, or both, and the sockets are covered by a protective lid when not in use. Please refer to the specification or contact us for more information on the compatibility between sockets and plugs. The series is suitable for jumpers and labels.

All product designs comply with the IEC60947-7-1, and UL1059 international standards.

The DKZ series is suitable for switch or control panels. The grounding with DKZ35 grounding terminals can be installed independently on panels or through a fastening mechanism via the tracks.

Miniature volume. Save installation space. Available for jumper assembly at sides.

The TKE series are terminal blocks designed specifically for transformers

There are two available sizes of 12.5 mm and 16.1 mm, and two types: either single-pin or dual-pin. The protective cover can be lifted so that the wires are not affected when exposed. Compatible fixing tracks are required for this series to mount and secure them onto the transformers for a safe and organized wiring structure.

Suitable marking labels can be applied, and all designs comply with the IEC60947-7-1 & UL1059 international standards.